Component Solution Services REC02F Manual de servicio Pagina 78

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 142
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 77
Ultraview 1030/1050 Monitors — Service Manual
4-14
Replacing the Fan/Battery Contact Assembly
1 Remove the chassis assembly from the housing as previously described.
2 Separate the chassis assembly from the module wall assembly by removing the two screws
above the battery ejection springs and the two screws near the bottom.
Figure 4-6: Replacing the fan/battery contact assembly
3 Pry up the center retainer on the battery contact assembly (near the battery ejection springs).
This should free the fan/battery contact assembly.
4 Remove the screw between the chassis and the interconnect PCBA.
Vista de pagina 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 141 142

Comentarios a estos manuales

Sin comentarios